Product
Dampers & fabricated valves
Isolation and flow-control equipment for flue-gas paths, ducts and process lines — built for high temperature, dust loading and continuous plant duty.
Control the gas path with confidence
Dampers and fabricated valves protect people and equipment when you isolate boilers, WHRB trains, fans and process ducts. Grandeh fabricates heavy-duty assemblies sized to duct dimensions, temperature, leakage class and actuator preference — for OEMs and end users across steel, sugar, power and process industries.
Product range
- Guillotine / slide-gate dampers for tight isolation
- Louver and multi-louver dampers for modulation
- Butterfly dampers for round and rectangular ducts
- Fabricated process valves and custom isolation assemblies
- Diverter and blanking arrangements for maintenance shut-offs
- Expansion joints coordinated with damper and duct interfaces
Typical applications
- Boiler and WHRB flue-gas duct isolation
- Forced-draft / induced-draft fan isolation and bypass
- Hot-air and process-gas ducting
- Cement, steel, power and distillery exhaust systems
Technical focus
| Aspect | Grandeh practice |
|---|---|
| Types | Guillotine, louver, butterfly, fabricated valves |
| Duty | Flue-gas / process duct isolation & modulation |
| Actuation | Manual, electric or pneumatic interfaces |
| Design care | Leakage class, temperature, dust loading, flange match |
| Works | Shendra MIDC, Aurangabad — ISO 9001 fabrication |
Available materials
Metallurgy and sealing follow design temperature, gas chemistry and leakage class:
- Frames & blades: Carbon steel for moderate flue-gas duty; stainless or alloy plate where temperature or corrosion requires it.
- Shafts & bearings: Selected for torque, temperature and dust exposure; packed or sealed glands as specified.
- Seals: Metallic, refractory or soft seals matched to leakage requirement and continuous operating temperature.
- Coatings: Protective paint or high-temperature finishes for outdoor and aggressive plant atmospheres.
Final materials are confirmed against duct size, design temperature / pressure and client specifications.
Testing and documentation
- Dimensional inspection against approved drawings
- Material test certificates (MTC) for structural plate and fittings where required
- Functional checks of blade travel and actuator interfaces before dispatch
- GA drawings and flange / duct interface details for site erection
- Third-party inspection (TPI) coordination when called in the purchase order
- Quality documents available via Grandeh project portal
Industries we serve
- Power — FD/ID fan and flue-gas path isolation
- Steel and process plants — hot-gas duct shut-offs
- Boiler OEMs — packaged damper supply with steam equipment
- Cement, sugar and distillery exhaust systems
See a recent dispatch: Guillotine dampers for a power project.
FAQ
What types of dampers does Grandeh manufacture?
Guillotine / slide-gate, louver and multi-louver, butterfly dampers, fabricated process valves, and diverter / blanking arrangements for maintenance shut-offs.
What materials are used?
Carbon steel is typical for moderate flue-gas duty; stainless or alloy plate where temperature or corrosion requires it. Seals and shafts are selected for design temperature and leakage class.
Can dampers be supplied with electric or pneumatic actuators?
Yes. Manual, electric or pneumatic actuation interfaces are matched to plant control preference and torque demand.
Do you support third-party inspection?
Yes. Dimensional checks, material certificates and TPI hold points are coordinated when specified in the purchase order.
