Product
Plate type heat exchanger
Compact, serviceable heat transfer for process heating, cooling and recovery — alongside Grandeh heavy fabrication for ducts, dampers and plant structures.
What is a plate-type heat exchanger?
A plate-type heat exchanger (PHE) packs a large heat-transfer area into a small footprint. Corrugated plates create turbulent flow that improves duty while remaining accessible for cleaning and plate replacement — suited to liquid–liquid and steam–liquid services in process plants.
Where PHEs are used
- Process heating and cooling loops
- Heat recovery between hot and cold streams
- Utility water / glycol circuits
- Pasteurisation, CIP and food / beverage duties (material dependent)
- Complementary cooling or heating alongside boilers, SCAPH and WHRB systems
Main elements
| Element | Role |
|---|---|
| Corrugated plates | Primary heat-transfer surface; pattern sets turbulence and ΔP |
| Gaskets (where applicable) | Seal channels and define flow paths between plates |
| Frame / carrying bars | Clamp the plate pack and allow opening for service |
| Connections & nozzles | Hot / cold fluid inlets and outlets to plant piping |
| Tie bolts / tightening hardware | Maintain sealing pressure on the pack |
What information is required to select a PHE?
Hot-side process data
- Fluid name / composition and physical properties (or a known fluid)
- Flow rate (m³/h or kg/h)
- Inlet and required outlet temperature (°C)
- Design / operating pressure and allowable pressure drop
Cold-side process data
- Fluid name / composition and properties
- Flow rate and inlet / outlet temperatures
- Design pressure and allowable pressure drop
Mechanical and site preferences
- Preferred plate material (e.g. SS304 / SS316) and gasket type
- Fouling factors and cleaning / CIP expectations
- Connection sizes, flange standard and footprint / height limits
- Whether the unit must open for plate inspection on site
Share both streams’ data with your enquiry — we will propose a practical plate count, channel arrangement and materials.
Technical focus
| Aspect | Typical practice |
|---|---|
| Duty | Liquid–liquid and selected steam–liquid services |
| Advantage | High area density, accessible for cleaning |
| Plate materials | Stainless grades matched to fluid chemistry |
| Works support | Aurangabad fabrication for related plant steel & ducts |
Complementary fabrication
Beyond PHEs, Grandeh supports boiler and heat-recovery projects with fabricated assemblies such as:
- Dampers and ducting for flue-gas paths
- Expansion joints and structural steel for thermal equipment
- Fuel-handling and plant support structures
FAQ
What data is required to select a plate heat exchanger?
Hot and cold fluid properties, flows, temperatures, allowable pressure drops, design pressures, fouling factors and preferred plate / gasket materials.
What services can a PHE cover?
Liquid–liquid heating and cooling, selected steam–liquid duties, and process heat recovery where compact, serviceable heat transfer is preferred.
Does Grandeh also supply related plant fabrication?
Yes — dampers, ducting, expansion joints and structural steel for boiler and heat-recovery projects.
